Amalgam Separators

          Solmetex |  Rebec Solution | AB Dental Trends

Rasch Amalgam Separators

Rash has been designing and building Amalgam Separation Systems since 1987 and has placed in excess of 15,000 units worldwide. The Rash 890 system is ISO certified and exceeds ISO standards, and meets the tougher German Test Method which uses a higher concentration of hard-to-capture small particles in the test protocol. Few other products meet this stringent higher level of performance. Initially developed in Sweden for the European market, today's Rasch 890 is time tested as opposed to many which were imagineered yesterday to take advantage of today's legislation. Ask other manufacturers how long they have been in production and how many units are installed worldwide for a clearer picture.

Priced Right

• Under $1,200 USD for complete system.

• One system treats up to 12 operatories or more

• Easily expanded with economical upgrade kit for large clinics.

• Amalgam collects in safe, strong economical canisters.

• Each replaceable canister lasts one doctor 18 months.

• No outside service contract or monitoring required.

• Maintenance-free between canister changes.

• Replace canisters when full in under 5 minutes

• Canister shipped by UPS to collection depot for recycling when full.

• Paperwork pre-done and freight pre-paid

• No recycling charges.

Trouble-Free

• Silent

• No moving parts

• No valves

• No electrical

• no maintenance calls

• 5 year Extended Warranty

High Capacity

• Highest thru-put available; 4 liters (1 gal)/min flow rate=2000 LPD rated capacity

• Use of any chair mounted cuspidors has little effect on unit's capacity

• Economical upgrade kits available as your practice grows

• Scrubber module available where ultra-high performance is required.

Fast installation

• Use with wet or dry suction systems.

• Plug-n-play! Simply place in position and connect 2 hoses

• Small footprint of 9-x-12.5" requires little floor space for placement

• Easily wall mountable if preferred as supplied - lightweight.

• No cutting or modification of existing vacuum lines required.

• Install at end of suction system-protects from residual mercury in existing piping.

• No danger of suction interruption from excess fluids.

• Incorporates an air-water separator with vent-added value

• Easily moved or relocated.

Several models of the Rash 890 System are available for different vacuum pump installations. All use the same Rash separation canister, but differ in the added equipment. One canister lasts one full-time doctor 18 months (two doctors 9 months etc.), regardless of how many operatories are in use. Model 890-1000 is for wet seal vacuum pumps. It consists of the canister plus an air-water separator, a mounting rack, and all the hoses and connectors. Model 890-6000 is for dry turbine vacuum pumps. It consists of just the canister and connectors.

For larger installations the 890-3000 Upgrade Kits may be added to the 890-1000 System to increase capacity and extend replacement periods. For larger dry systems, tee the outlet line and install multiple 890-6000 units in parallel. The MICRO-CLEANSE canister and 890-4000 systems are for special installations requiring extreme removal of fine particles and dissolved mercury compounds.