Smith
S-100
(Smith Company)
Direct
Replacement for Blue or SS Time/Temp.
Warranty Information:
New controls: 2 years
Reconditioned Controls: 2 years
Repaired Controls: 2 years
Specifications:
Temperature Control:
The temperature is regulated within 1/2 degree
Celsius of the factory setting. The standard
factory setting is 28 degrees Celsius.
Alternative temperature settings can be ordered
at no extra charge.
Speed Control:
Three different processing times are provided.
The standard factory settings are 1 minute-fast,
4 1/2 minutes-process, and 6 minutes-slow.
Alternative processing times can be ordered at
no extra charge.
Diagnostic Capabilities:
The check light indicates a fault with the
temperature probe, heating pad or chemistry
level. Combinations of switch positions and
illuminated lights aid in determining which
component is creating the problem. Each control
comes with a troubleshooting guide.
Overheating Protection:
Timer circuitry shuts off power to the heating
pad if it has been on continuously for more than
approximately one hour. The timer is easily
reset by turning the switch back to off and then
returning it to standby, process, slow or fast.
Effective Fuse Protection:
The heating pad and motor are on separate
circuits, with separate fuses.
Solid State Failsafe Circuitry:
The circuitry is designed to prevent damage to
the control and processor from a faulty heating
pad, temperature probe, motor, water solenoid
and/or replenisher.
Power Requirements:
120 VAC, 60 Hz, 7 amps
Shipping Weight:
4 lbs.
Dimensions: 9.25 inches wide x
2.5 inches high x 8.0 inches deep
|
Item # |
Description
|
Price |
|
S-75 |
Smith S-100
Time/Temp Control 75:1 ratio - no core
required |
$458.00 |
|
S-60 |
Smith S-100
Time/Temp Control 60:1 ratio - no core
required |
$458.00 |
|
SR-75 |
Smith S-100
Time and Temp. Control 75:1 ratio -
Reconditioned
no core required |
$417.00 |
|
SR-60 |
Smith S-100
Time and Temp. Control 60:1 ratio -
Reconditioned
no core required |
$417.00 |
|
RS-75 |
Smith S-100
Time and Temp. Control 75:1 ratio - Repaired
with exchange core |
$250.00 |
|
RS-60 |
Smith S-100
Time and Temp. Control 60:1 ratio - Repaired
with exchange core |
$250.00 |
|
RS-NC |
No Smith Time
and Temp. exchange core additional charge |
$100.00 |
Dent-X Time/Temp Controls (Smith Company)

Smith offers reconditioned and repaired control
units for the Dent-X Basic, EXCEL, 9000 and XL.
Please specify by part number when ordering
because the XL and EXCEL can easily be confused.
Repaired controls carry a 1 year warranty,
reconditioned controls carry a 2 year warranty.
We
also carry only the front panel for black
control boxes. Be sure to specify the model
processor you are using and the type of
connector for the panel you are replacing.
|
Repaired Black Controls - 1 Year Warranty
|
|
Item # |
Description
|
Price |
|
K-TT |
DENT-X Basic
(black w/run switch) T/T Control - repaired
- with exchange core |
$425.00 |
|
E-TT |
DENT-X EXCEL
(black) Time/Temp Control - repaired - with
exchange core |
$425.00 |
|
9-TT |
DENT-X 9000
(black) Time/Temp Control - repaired - with
exchange core |
$425.00 |
|
XL-TT |
DENT-X XL
(black) Time/Temp Control - repaired - with
exchange core |
$425.00 |
|
BT-NC |
No Black
Control Exchange Core - additional charge
|
$100.00 |
|
Reconditioned Black Controls - 2 Year Warranty
|
|
Item # |
Description
|
Price |
|
K-TT2 |
DENT-X Basic
(black w/run switch) T/T Control - with
exchange core |
$525.00 |
|
E-TT2 |
DENT-X EXCEL
(black) Time/Temp Control - with exchange
core |
$525.00 |
|
9-TT2 |
DENT-X 9000
(black) Time/Temp Control - with exchange
core |
$525.00 |
|
BT-NC |
No Black
Control Exchange Core - additional charge
|
$100.00 |
|
Front
Panel, Black Controls - 1 Year Warranty |
|
Item # |
Description
|
Price |
|
BCP-K |
Panel, Basic
Control, analog switches (5 over 5
connector) |
$168.00 |
|
BCP-K8 |
Panel, Basic
Control, analog switches (8 in-line
connector) |
$168.00 |
|
BCP-L |
Panel, XL
control, analog switches (5 over 5
connector) |
$168.00 |
|
BCP-L8 |
Panel, XL
control, analog switches (8 in-line
connector) |
$168.00 |
|
BCP-N |
Panel, 9000
Control, analog switches(5 over 5 connector) |
$168.00 |
|
BCP-N8 |
Panel, 9000,
9000WD, XL Control, analog switches
(8 in-line connector) |
$168.00 |
Philips Time/Temp Controls (Smith Company)
Smith
offers repaired control units for the Philips
Blue Time/Temp Controls for either 75:1 or 60:1
ratio drive motors. If any problems occur, we
recommend you replace the control with a Smith
S-100 Control. For just a slight increase in
price over a repaired Philips Control, you will
receive a brand new S-100 control that carries a
2 year warranty, while the repair Philips
Controls carry a 1 year warranty.
|
Item # |
Description
|
Price |
|
TT-75 |
Philips Blue
Time/Temp Control 75:1 ratio with exchange core |
$417.00 |
|
TT-60 |
Philips Blue
Time/Temp Control 60:1 ratio with exchange core |
$417.00 |
|
TT-NC |
No Philips
Blue Time/Temp Exchange Core - additional
charge |
$100.00 |
Air
Techniques A/T 2000 Electronics Module (Smith
Company)

Smith offers repaired control units for the Air
Techniques A/T 2000 Processor line. Repaired A/T
2000 Controls carry a 1 year warranty.
|
Item # |
Description
|
Price |
|
ATEMA |
A/T 2000 Auto
Electronics Module (as available)
- with
exchange core |
$697.00 |
|
ATEMB |
A/T 2000 Basic
Electronics Module (as available)
- with
exchange core |
$667.00 |
|
ATEMP |
A/T 2000 Plus
Electronics Module (as available)
- with
exchange core |
$667.00 |
|
ATEMX |
A/T 2000 XR
Electronics Module (as available)
- with
exchange core |
$667.00 |
|
ATEM-NC |
No A/T 2000
Electronics Module Exchange Core -
additional charge |
$150.00 |
Anderson Dental
|
Item # |
Description
|
Price |
|
APE |
A/T Plus
Control Exchange* |
$575.00 |
|
AXE |
A/T2000 XR
Control Exchange* |
$575.00 |
|
BCE |
Black Control
Exchange 810 Basic* |
$385.00 |
|
XCE |
Black Control
Exchange 810 XL, 9000* |
$385.00 |
|
BME |
Black Control
w/Upgrade Exchange* |
$500.00 |
|
TTE |
Blue Control
Exchange* |
$385.00 |
|
TS2 |
Temp Sensor,
Black Control |
$55.00 |
|
TS1 |
Temp Sensor,
Blue Control |
$55.00 |
*plus core char
($200.00) refundable upon return of repairable
core
|