• Brand name quality and performance
• Complete with installation kit and power supply
• Includes one P-10 Universal and one FS-100 Slim Line insert
• Accepts most other 25 kHz inserts
• State of the art design & manufacturing techniques
• 30 kHz tips available for other brands - see below

• Brand name quality and performance
• Complete with installation kit and power supply
• Autoclavable handpiece and four tips included
• Piezo = less heat = less coolant = better visability
• Maximum deposit and biofilm removal

• Fits most existing systems, no adaptors required
• Heavy duty wall thickness for strength
• Stable base design
• Made with pride in the USA
• Tested to 10,000 pressure cycles at double working pressure!
• Rupture tested to 200 psi

• Fits most existing systems, no adaptors required
• Heavy duty wall thickness for strength
• Both bottles fit side by side in dual systems - 3-1/4" Dia
• Stable base design
• Made with pride in the USA
• Tested to 10,000 pressure cycles at double working pressure!
• Burst tested to 200 psi.

• Fits most existing systems, no adaptors required
• Heavy duty wall thickness for strength
• Tested to 10,000 pressure cycles at double working pressure!
• Burst tested to 170 psi
• Broad base for table-top stability
• Made with pride in USA

• Xtra heavy duty
• External tube gives visual indication of fluid level
• Fits most existing systems
• Both bottles fit side by side in dual systems, 3.25" diameter

• Includes regulator, gauge, selector and on/off toggles
• Heavy duty bottle
• Dispenses fluid to syringe and HPs
• Selector toggle changes from city water to bottled fluid
• Mounts almost anywhere
• 2" post clamp and flat surface clamps included

• Includes regulator, on/off toggle and gauge
• Heavy duty bottle
• Dispenses fluid to syringe and HPs
• Mounts almost anywhere
• 2" post clamp and flat surface clamps included

• 1 Liter Bottle
• Includes face-mounted 1/4" Female Q.D.LI>Self regulating 35 PSI output
• Fully shrouded - easy to clean

• Same as C-1807 but includes pressure gauge

• Upgrade Kit to Change Most Systems to Q.D.
• Allows for Bottle Removal Without Threading
• Fast and Easy to Install
• No Adhesive Required
• Positive Push/pull Lock, no Tabs to Break off
• Saves Time in Refilling/Exchanging Required for Q.D.

• Use to build your custom fluid delivery system

• Build your own from scratch

• Non-relieving 35 PSI output
• Rated input from 35–150 PSI
• 1/16" barbed fittings

• Voltage stabilized single H.P. System
• Lamp is activated when the foot control is depressed
• C-2122-G includes Grey 5-Hole H.P. Tubing with Bulb
• Kits with alternative tubing styles and colors below
• Integrated air-electric switch
• Remote power pack
• Soft-Start technology extends bulb life
• 220 Volt Power supply upgrade ordered below

• Voltage stabilized Dual/Triple H.P. System
• Lamp is activated when the foot control is depressed
• C-2124-G includes one Grey 5-Hole H.P. Tubing with Bulb - order extra tubings separately
• Kits with alternative tubing styles and colors below
• Integrated air-electric switches
• Remote power pack
• Soft-Start technology extends bulb life
• 220 Volt Power supply upgrade ordered below

• Soft-start technology extends power-optic bulb life
• Helps eliminate color variations due to voltage fluctuations
• Potential to pay for itself in bulb savings
• Protects bulb from voltage spikes and dips
• See pages 32-33 for kits and tubing

• Use with 5 hole ISO Style Power-optic Tubing
• 3.5VDC, 720 MA
• Fits Kinetics, Proma & Previous Style DCI
• Black Gasket
• Use E-1579 ( 8813 ) for Current DCI Systems

• Purges excess lubricant and water from handpiece
• Patented Bio-Cleanse HEPA exhaust filter
• Hepa Filter helps protect operator from air-borne pathogens
• Provides for quick and easy handpiece maintenance
• Exhaust reservoir safely collects excess lubricant
• Purges handpiece coolant air and water lines
• Easy view gauge with adjustable air regulator
• Air supply line with 1/4" male quick-disconnect included
• Compact size of a foot control - requires little counter space
• Handpiece adapter required (see below)

• Shipped in twin-packs of two 2oz bottles

• Auto switch turns heater on/off with dental unit
• 200 watt heater provides quick recovery
• May be base or side mounted

• Manual on/off switch for fingertip control
• 200 watt heater provides quick recovery
• May be base or side mounted

• Use as a replacement for most brands of HP Purge Stations
  
• Upgrades all units to accept Bio-Cleanse Hepa Filter System

• 8" x 11-1/2" Viewing area
• Bulbs and LED'S provide even diffused backlight
• Swivel Mounts available for round or square arms
• Wall mount, or Stand-alone
• Accepts Pan, Bitewing and Periapicals
• Provide clips retain film
• Compact and light-weight
• Low voltage, Power supply included

• Requires only air supply
• HP holder and tubing included
• Foot control and regulator pre-connected

• Enables contact-free floss dispensing.
• Smooth clean contours facilitate surface disinfection.
• Cutter shields detach for autoclaving.

• Stainless steel cutters sever floss quickly and easily.
• Wall mounted, requires no counter or tray space.
• Measures just 4" x 3" x 2".
• Uses economical 200 yd. floss spools.
• Reloading floss is a snap.

• Quickly mounts in a variety of convenient locations.
• Accepts most brands of 200 yd. floss spools.

• Fired ceramic quality
• Enhanced appearance
• O-rings included

• Easy to install and adjust
• Convert manual bowl rinse, cup fillers or power optic systems to adjustable time delay
• Compact; fits into tight spaces
• Replace expensive and difficult to repair diaphragm systems

• 2 gallon volume, 15" tall
• Heavy wall molded polyethylene
• 1" drain port on base
• Side mounted twin 1-1/4" inlet ports
• Use for twin pump installation
• Adjustable powdercoated steel mounting bracket
• Threaded barb selection included

AB Dental Trends Amalgam Separation, providing the broadest coverage and support for North America.

Common features of all models:

• Certified to exceed the ISO 11143 test at 99.3%
• Small footprint for tight spaces
• High max throughput of 4 liters per minute
• Quick change of canisters
• Cuspidors easily handled
• Recycling and return shipping is included
• Each canister lasts 18 months per doctor

Features:

• Ideal for typical clinics
• Flexible installation for all suction lines
• Floor or wall mount
• Includes rack and buffer tank
• Integrated port for optional overflow alarm 890-5500

Features:

• Installed in small clinics and major hospitals around the world
• Attaches to the outlet of the pump collector tank
• Large facilities may use a simple manifold for the desired number of canisters to accommodate multiple doctors and higher flow rates

• Unique system for hospitals doing occasional dental work, remote clinics operated in multi-use facilities, and portable clinics
• Store with portable evacuation pump under the counter or in cabinet
• At the end of operatory day, lay the drain hose into the sink, open two valves, pour your waste collector jar into the top funnel opening, quick-flush and prepare for storage.

Please Note: In Canada, sold exclusively through Sinclair Dental.

• Includes a selection of dividers
• Unique rear hook grips support bars
• Sits flat or tilted

• Clear lid allows previewing of contents
• Includes a selection of dividers
• Unique rear hook grips support bars
• Sits flat or tilted

• Replacement parts for C-1802W and C-1802C

• Attaches to rear of work surface
• Securely holds 4 storage organizers
• Organizers with dividers included
• Level or tilting positions

• Rests on-top of any work surface
• Securely holds 4 storage organizers
• Organizers with dividers included
• Level or tilting positions

• 110V/3.6VAC 700 mA, 2.5VA

• 110V/12VAC 1Amp, 12VA

• 110V/12VAC 40VA/3.3 Amp

• 110V/24VDC 12VA/500 mA

• 110V/24VAC 70VA/2.9 Amp

• Use as a direct UL replacement
• Molded clear plug for instant wire condition viewing
• Includes 10’ grounded supply cable

• Air activated electric switch, 4 PSI cracking pressure
• 10-32 port - 1/16" exchangeable fitting
• Normally open or closed
• U.L. listed switch

• Universal
• Normally open push button
• Single pole, single throw
• Screw terminals

• Stainless steel, brushed finish
• 1/2" diameter switchhole
• Used with X-ray exposure switch P-1043

• Use as a replacement for most dental units
• 9" x 14" x 4-1/2" includes plugs and grommets
• Durable powdercoat finish
• Grey plastic snap-on cover
• 2 x Filters
• 2 x Manual shut-offs
• 1 x Mini water regulator
• 1 x Full size air regulator

• Use as a replacement for most dental units
• 9" x 14" x 4-1/2" includes plugs and grommets
• Durable powdercoat finish
• Grey plastic snap-on cover

• 9" x 14" x 4-1/2"
• 2-1/2" and 3/4" openings
• Durable powdercoat finish

• Snap-on durable ABS

• Threads onto SpiroLock
• Locks tight onto both sides of housing

• Smooth pass-through for tubing or wires
• Eliminates sharp hole edges

• Rigid white plastic
• Handy for extra utility center holes