|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
Eyewash Systems - Desert Assembly - NDC
Opti-Klens I
Chrome-plated,
solid brass eyewash unit easily installs on any
existing sink or basin faucet as a permanent eye
wash fountain with unlimited water supply in an
emergency, unlike portable models. In operation,
unit mounts behind the spout, where it remains out
of the way for every day use. In an emergency, it
frees both hands to hold eyes open to the flow of
water. Delivering more than twice the required water
flow, it does so at a reasonable height. It will
function properly with as little as 15 lbs. of water
pressure. It is restricted to reduce high water
pressure to a velocity low enough not to be
injurious to the user. No plumbing required. Two of
the most common adapters are packed with the unit.
Other adapters are available from manufacturer.
Meets ANSI Standard #Z358.1-1998 for an eyewash
unit. The addition of the Eliminator Valve allows
water temperature to be pre-set at the faucet and
remain on. You now have a dedicated eyewash station
with only cold water available. For sink use, the
water flow is activated by the use of the push
through plunger on the Eliminator Valve. Push the
plunger to the opposite side for water flow.
|
|
Item # |
Description
|
Price
|
|
329201 |
OK-IE Opti-Klens I Emergency
Face & Eyewash w/Eliminator Valve |
$85.00 |
|
329200 |
OK-I Opti-Klens I Emergency
Face & Eyewash w/o Eliminator Valve |
$70.06 |
Opti-Klens II
Chrome-plated,
solid brass face & eyewash unit is designed to fit
most standard faucets as a permanent face wash &
eyewash fountain with unlimited water supply in an
emergency. In operation, unit mounts to the spout
with two spray nozzles curving upwards. In an
emergency, it frees both hands to hold eyes open to
the flow of water. Delivering more than 3 gallons of
water per minute, it does so at a reasonable height.
No plumbing required. Two of the most common
adapters are packed with the unit. Other adapters
are available from manufacturer. Meets ANSI Standard
#Z358.1-1998 for an eyewash unit. The addition of
the Eliminator Valve allows water temperature to be
pre-set at the faucet and remain on. You now have a
dedicated face wash & eyewash station with only cold
water available. For sink use, the water flow is
activated by the use of the push through plunger on
the Eliminator Valve. Push the plunger to the
opposite side for water flow.
|
|
Item # |
Description
|
Price |
|
269622 |
OK-IIE Opti-Klens II
Emergency Face & Eyewash w/Eliminator Valve
|
$114.50 |
|
269422 |
OK-II Opti-Klens II
Emergency Face & Eyewash Fountain w/o Eliminator
Valve
|
$93.70 |
Eliminator
Valve
| The
Eliminator valve may be added to any of the
Opti-Klens I or II models. It allows water
temperature to be pre-set at the faucet and
remain on. |
|
Item # |
Description
|
Price
|
|
329202 |
OK-EV Eliminator valve
only, for all models |
$43.15 |
Opti-Klens II Lab
| OK-II Lab
is for use on laboratory faucets, having a
greater forward angle than OK-II Regular.
With all the same features of the Regular,
both units are stationary on faucet to
reduce the risk of misalignment and
non-compliance. |
|
Item # |
Description
|
Price
|
|
429022 |
OK-IIL Opti-Klens II
LAB Face/Eyewash Fountain |
$106.49 |
Opti-Klens IIE Lab
| The
addition of the Eliminator Valve to the
Opti-Klens II Lab allows water temperature
to be pre-set at the faucet and remain on.
You now have a dedicated eye/ face wash
station with only tempered water available.
|
|
Item # |
Description
|
Price
|
|
429622 |
OK-IIE Opti-Klens II
LAB Face/Eyewash with Eliminator Valve |
$119.15 |
Opti-Klens
1M
| OPTI-KLENS
1M is a wall mounted eye/face wash with a
plumbed connection. If this is your
requirement, check our quality and our
prices. We offer a stainless steel bowl at a
price less than charged for plastic from
other makers. |
|
Item # |
Description
|
Price
|
|
469022 |
OK-IM Opti-Klens Wall
Mounted Face/Eyewash Fountain |
$180.00 |
You are visitor no.
Updated:
04/01/2008
| | | |
