Litex 680-A 

• Automatic Timer
• 9 mm probe and shield
• 10 to 60 second timer
• Audible Tone

Litex 682 Curing Light 

• Easily located thumb-control setting for timer and intensity in a two-stage polymerization curing light. Aseptic, lightweight and ergonomically designed
• Two-stage polymerization with initial lower intensity prior to high intensity polymerization resulting in less shrinkage stress
• Power turbo probe included as a standard. Intensity over 800mW/cm², cure rate 10 seconds 3mm
• Wavelength 430nm and 470nm effectively cures all light cure material
• Digital countdown timer with audible beep every 10 seconds, onset and completion in both phases of curing cycle
• Light intensity meter included to assure polymerization intensity
• Disposable orange mini shield included for operator's protection

Litex 685 Plasma Arc Curing and bleaching System 

Includes:
Bleaching stand, fiberoptic probe, whitening arch, flexible liquid light guide, Everbrite bleaching and patient kit, 2 pairs of glasses, bag of 10 shields, power cord and manual.

Litex 685 Plasma Curing Light State-of-the-art, plasma arc based, composite curing light Select 1-3 second curing time or 5 second step-cur cycle (low/high intensity) Easily rotated, magnetically held, fiber optic probe Handpiece actuated fingertip pressure ring High resolution, flexible liquid light guide Eye protection glasses and disposable light shield included Available for 100/110 Volts 50/60 Hz or 220/240 Volts 50 Hz operation. Item # Description Price 685 Litex 685 Plasma Arc Curing Light $2,333.33

• Thin and lightweight dual intensity light polymerization LED curing light.
• Patent pending 360" rotatable light guide with front loaded LED provides easy access and maximum power.
• No more bulbs to replace with average LED life of 50,000 hours.
• Smooth and contoured ergonomic design offers added comfort and easy cleaning.
• Conveniently located thumb buttons set timer and intensity for two stage step-curing.
• Two stage polymerization with initial lower intensity prior to higher intensity polymerization resulting in less shrinkage stress.
• Automatic timer with audible tone and digital display on handpiece.
• Light intensity of 1,200 mW/cm2 cures composite in 10 seconds / 4 mm.
• Curing cycle can be interrupted manually with one-touch trigger button.
• Large Lithium Battery capacity provides 750 ten-second curing cycles on a full charge.
• Low battery warning beeper.
• Built-in light intensity indicator.
• Eye protection shield included for safe operation.

Litex 695C
Two-Phase Polymerization Cordless LED Curing Light

• Thin & lightweight dual intensity light polymerization LED curing light

• Patent pending 360º rotatable light guide with front loaded LED provides easy access and maximum power

• No more bulbs to replace with average LED life of 50,000 hours

• Smooth and contoured ergonomic design offers added comfort and easy cleaning

• Conveniently located thumb buttons set timer and intensity for two state step-curing

• Two stage polymerization with initial lower intensity prior to higher intensity polymerization resulting in less shrinkage stress

• Automatic timer with audible tone and digital display on handpiece

• Light intensity of 1,00 mW/cm² cures composite in 10 seconds / 4mm

• Curing cycle can be interrupted manually with one-touch trigger button

• Large lithium batter capacity provides 750  ten-second curing cycles on a full charge

• Low battery warning beeper

• Built-in light intensity indicator

• Eye protection shield included for safe operation

Price

$58.00

$66.67

$83.00

$100.00

$100.00

Price

$30.00

$27.00

$350.00