Light weight yet durable construction: At only 2.9 oz the Prophy-Lite is extremely light weight. While it is slightly heavier than the Midwest^TM RDH^TM the added weight is due to the Prophy-lite’s stainless steel rotor housing verses the aluminum housing of the RDH^TM. While stainless steel adds a few ounces to the over all weight the increase in durability can not be match when compared to aluminum. 

The central swivel feature and the easy push-on/pull-off angle installation of the Prophy-Lite make changing out prophy angles quick and easy and allows the clinician to rotate the prophy angle easily with out the resistance of the handpiece tubing. 

Removable nose piece: Allows broken disposable prophy angles to be easily removed by simply removing the front nose piece. The RDH^TM with its fixed nose cone requires broken angles to be removed at the factory – at considerable cost to the office (of course)! One broken angle and you will wish you had a Prophy-Lite!

Lube Free! Special sealed pre-lubed bearing require almost no maintenance. All that is required is occasional application of cleaner and conditioner lube (supplied).  Go from the autoclave to the handpiece tubing with out lube.

Item #	Description	Price
3000	Vector Prophy Lite Lube Free Handpiece.  Package includes:  Handpiece, air motor cleaner / conditioner, instructions. Handpiece has a 1 year warranty.	$472.22

 

---

Features:

• Full 360 degree swivel nose cone to eliminate tubing drag

• A powerful and consistent 5,500 RPM motor (at 32 psi)

• Motor engineered for High Torque - the MICROMite cuts through lab materials simply and easily

• This handpiece has the added torque to get the job done

• The high quality, durable chuck accepts all standard doriot contra angles and prophy angles as well as disposable prophy angles and lab burs

• Fully autoclavable

Item #	Description	Price
LMM-4	MicroMite Low Speed Motor 4 Hole 5,500 RPM Includes:  5,500 RPM handpiece with swivel nose cone and standard 4 hole Midwest type fixed back end.	$275.00
LMM-2	MicroMite Low Speed Motor 2 Hole 5,500 RPM Includes:  5,500 RPM handpiece with swivel nose cone and standard 2 hole borden type fixed back end	$275.00

 

---

Features:

• 5,000 RPM high torque motor with twist style chuck mechanism

• Designed to fit comfortably and balanced in the operator's hand

• Equipped with a speed control ring and a twist style chuck

• The twist type chuck accepts all u-type attachments as well as all brands of
  disposable prophy angles

• Fully Autoclavable

• 6 month warranty

Item #	Description	Price
ERG-T	Ergo-Torque 5,000 RPM Low speed motor Available in 4 hole standard back end - Made in Israel	$220.00

 

             DRA-U         |          ERA-U         |            MRA-U       |            DPS-U      

Item #	Description	Price
DRA-U	Deluxe Ball Bearing Latch Doriot	$75.00
ERA-U	Economy Latch Doriot	$24.00
MRA-U	Mini Latch To Fit Doriot	$55.00
DPS-U	Deluxe Prophy Angle To Fit Doriot	$12.00

 

---

Features:

• Connects to your standard 4 hole handpiece tubing for easy installation

• Effective and comfortable for both patient and practitioner

• Rotating 360^o Spray nozzle allows access to all areas of the mouth

• Large powder reservoir holds enough powder for a typical procedure

• The Stain Master uses any and all brands of prophy powder and will run on regular handpiece air pressure (40 PSI).

Item #	Description	Price
PB500	Vector Stain Master Kit Includes:  Handpiece, Nozzel and Prophy Powder	$369.23

 

Item #	Description	Price
PBPP	Vector Stain Master Prophy Powder	$20.00

 

Item #	Description	Price
PBRT	Vector Stain Master Replacement Tip	$100.00

 

Item #	Description	Price
PBLC	Vector Stain Master Replacement Powder Case Cap Set of 3 (2 lenses, 1 o-ring)	$50.00

 

Item #	Description	Price
PBOR	Vector Stain Master replacement tip o-ring set	$10.00