|
550 Porta-Vac Bench Top Dust Collector |
|
|
Handler
Manufacturing
announces a new and
improved Porta-Vac
unit Model #550.
This is replacing
the traditional
Model #66 Porta-Vac.
It is perfect for
bench top light
grinding and
polishing with a
hand piece or lathe.
Featured
enhancements include
40% more suction
power, compact in
line suction design,
removable resin
clean out tray,
replaceable clear
acrylic shield and
reusable and
replaceable pleated
rear filter. Also,
the #550 comes with
a florescent light
for hours of cool,
bright operation.
The #550 will
collect 0.5 microns
of dust and larger
particles. The unit
was designed for
better, more
efficient
performance and easy
operation. Take it
out of the box,
install the light,
plug it in, and it
is ready for use.
The durable white
powder coated heavy
gauge steel frame is
built to last, and
the unit is made in
the USA by Handler.
Shipping Weight: 17
lbs Unit Dimensions:
8 1/2wide x 12high
x 14deep |
|
Item # |
Description |
Price |
|
550 |
Porta-Vac |
$292.54 |
|
|
|
|
66A Under Bench
PORTA-VAC |
|
|
An under
bench single position dust collector for
use in collecting dry grinding and
polishing dusts from lathe or handpiece
operations. The No. 66A Under bench
Porta-Vac has a suction capacity of 150
CFM (cubic feet/minute) [71m3/min.] and
is shipped complete with an 83WL splash
hood, 3 1/2 feet of 3 [7.6cm] flexhose
and an under bench canister with suction
unit mounted on top. Not for wet dust or
heavy grinding operations, eg. ALO.
Shipped complete ready for set up under
the bench with table top splash hood.
The No. 66A may be shipped with a bench
top fishmouth in lieu of a splash hood.
Please specify when ordering.
Shipping Wgt.: 23 lbs [10.4 Kg] -
(shipped in two cartons) Unit
Dimensions: Bench Hood - 6 wide x 10
deep x 12 high [15cm x 25cm x 30cm]
(WITH LIGHT) Canister - 10 wide x 6
deep x 22 high [25cm x 15cm x 56cm]
|
Item # |
Description |
Price |
|
66A |
Under Bench Porta-Vac |
$399.00 |
|
65A |
Filters 10" x 10" x 2" |
$18.50 |
|
|
|
76D-0 Bench Top
Dust Collector |
|
|
A bench top
polishing unit
designed to provide
365 CFM (cubic
feet/minute)
[172m3/min.] suction
intake through two
frontal suction
inlets. The 76D-0 is
constructed of heavy
gauge sheet steel,
finished in a
durable, baked
coating. Two 10 x
12 x 2 [25cm x
30cm x 5cm] (480
cubic inches)
[7.9m3] reversible
and replaceable
filters entrap dusts
as small as 5
microns and larger.
This unit is shipped
complete ready for
use with your lathe
or it may be
purchased with a No.
26A Red Wing
Polishing Motor (SEE
76D-3). Two aluminum
pumice/polishing
pans are provided to
hold wet pumice and
dry grindings. This
unit is NOT
recommended for use
with gypsum dust or
ALO.
Shipping Wgt.: 54
lbs [24.5 Kg] Unit
Dimensions: 29 wide
x 20 1/2 deep x 13
high [74cm x 52cm x
33cm] |
|
|
Item # |
Description |
Price |
|
76D-0 |
Bench Top Dust Collector |
$422.65 |
|
76D-F |
Filters - 10" x 12" x 2" |
$16.95 |
|
|
|
76D-3 Bench Top
Dust Collector |
 |
The 76D-3
Bench Top dust collector is identical to
the 76D-0 described above, except it is
provided with a No. 26A polishing motor.
The frontal interior polishing area may
be illuminated with two 60 watt
incandescent bulbs to provide the user
with proper light for grinding and
polishing operations. Finished in a
durable, baked coating.
Shipping Wgt.: 93 lbs [42 Kg] - (Shipped
in two cartons.)
Unit Dimensions: 29 wide x 20 1/2 deep
x 13 high [74cm x 52cm x 33cm]
|
Item # |
Description |
Price |
|
76D-3 |
Bench Top Dust Collector
w/Lathe |
$701.47 |
|
76D-F |
Filters - 10" x 12" x 2" |
$16.95 |
|
|
|
62-II Super Sucker
II |
|
|
|
62-II SUPER
SUCKER: Designed
to provide
excellent
suction to a
single bench top
work position.
The 62-II Super
Sucker develops
110 CFM ( cubic
feet / minute)
at a static
pressure of 63"
of H20 and is
one of the most
powerful single
station dust
collectors
available.
Designed for
continuous duty,
the double
walled
disposable
filter bag is
easily removed
through the
front access
door with the
removal of two
thumb screws. A
rear internal
activated
charcoal filter
aids in the
removal of
acrylic monomer
odors. The 62-II
Super Sucker is
shipped complete
with the dust
collector with
variable speed
controlled
suction motor, 4
feet if 2-1/2"
flex hose and a
fishmouth. A 6"
resin splash
hood may be
order in lieu of
the fishmouth.
This unit is not
recommended for
collection of
ALO dusts.
Shipping Wgt: 35
lbs (16 Kg)
Unit Dimensions:
10" wide x
15-1/2" deep x
13" high (25cm x
39cm x 35.5cm)
|
|
|
Item # |
Description |
Price |
|
62-II |
Super Sucker II |
$519.72 |
|
62-IIDF |
Disposable Filters (6) |
$29.95 |
|
62-IIFB |
Polyester Filter |
$42.50 |
|
62-IICF |
Charcoal Filters |
$29.95 |
|
|
|
62 Super Sucker |
|
|
Designed
to provide maximum suction capacity, the
No.62 Super Sucker develops 225 cfm
(6.36M3/min) suction capacity through
two top inlets. Dust and grindings are
entrapped in a removable, disposable
paper filter. A secondary polyester
filter entraps finer dusts. A third
filter made of activated charcoal
removes up to 80% of acrylic monomer
odors. Shipped complete with two 87210
fishmouths, two four foot sections of 3
(7.6cm) flexihose and four clamps, this
unit is an excellent addition to the
smaller laboratory which is collecting
dusts sporadically.
Shipping Wgt.: 42 lbs [19.1 Kg]
Unit Dimensions: 14 3/4 wide x 8 1/2"
deep x 17 3/8 high [37cm x 22cm x
44cm]
|
Item # |
Description |
Price |
|
62 |
Super Sucker |
$546.18 |
|
62FS |
Foot Switch - Continuous |
$101.91 |
|
62FS-M |
Foot Switch |
$101.91 |
|
62CF |
Filters, Charcoal |
$35.50 |
|
62DF |
Filters, Disposable |
$27.95 |
|
62PF |
Filters, Polyester |
$39.95 |
|
|
|
66D READI-VAC |
|
|
An under
bench dust collector designed for the
collection of dusts created by handpiece
grinding. The 66D effectively entraps 5
micron and larger dust particles with
150 CFM (cubic feet / minute) quiet
suction. When used in conjunction with
an in drawer Grind-n-Tray, most dust
particles are entrapped into the
removable 10" x 10" x 2" fiberglass
filter.
Shipped complete with 3-1/2 feet of 3"
flex hose and a magnetic flange for
adherence to metal drawers, the 66D will
quickly pay for itself in precious metal
grindings collected. This unit is NOT
recommended for the collection of wet
dusts, gypsum or ALO dusts.
Shipping Wgt: 23 lbs {10.4 Kg}
Unit Dimensions: 10" wide x 6" deep x
22" high (25cm x 15cm x 56cm)
|
Item # |
Description |
Price |
|
66D |
Readi-Vac |
$306.99 |
|
|
|
69
MOTOR-VAC Attachment
(Special Order) |
|
|
69 MOTOR-VAC
Attachment: The 89 Motor-Vac attachment
is built to assemble to the left side of
a dental lathe and provide suction to
the right side of the lathe. When the
lathe is activated, the suction impeller
attached to the left shaft creates 175
CFM (cubic feet / minute) suction at Low
(1725rpm) speed and 350 CFM on High
(3450rpm) speed.
The 69 Motor-Vac is shipped complete
with a
6" wide splash hood, suction housing and
4" flex hose. A bench top fishmouth may
be substituted in lieu of a hood. This
unit is NOT recommended for the
collection of wet dusts, gypsum or ALO
dusts.
Shipping Wgt: 17 lbs (7.7 kg)
Unit Dimensions: 26" wide x 16" deep x
12" high (66cm x 38cm x 30 cm)
|
Item # |
Description |
Price |
|
69 |
DISCONTINUED |
|
|
69FB |
Filter Bag |
$39.95 |
|
|
|
70 MOTOR-VAC |
 |
The No. 70 Motor-Vac
is a complete single
position dust
collecting and
polishing unit. It
incorporates a Model
69 Motor-Vac
attachment and a
Model 26A polishing
lathe. The lathe may
further be fitted
with additional
attachments such as
the Auto-Chuck or
Chuck/ Changer to
allow the user to
complete all
grinding and
polishing operations
on the right side of
the lathe (these
chucks are provided
at additional cost).
Dusts are channeled
through the rear of
the lighted 83WL
splash hood and into
a finely woven dust
bag. The dust bag is
easily removed from
the rear of the
suction outlet,
cleaned and
replaced. This unit
is NOT recommended
for use with gypsum
dust or ALO.
Shipping Wgt.: 56
lbs [25.3 Kg]
-(Shipped in two
cartons.)
Unit Dimensions: 26
long x 15 deep x
12 high
[66cm x 38cm x
30.5cm] |
|
|
Item # |
Description |
Price |
|
70 |
Motor-Vac |
$517.59 |
|
69FB |
Filter Bag |
$39.95 |
|
|
|
60U Dust Collector |
|
Note:
Picture shown
with 2-Fishmouth
2-4' PC hose |
The 60U dust
collector is
designed to
provide
suction to
two 3
[7.6cm] work
positions,
simultaneously.
Powered by a
ball
bearing,
capacitor
start,
industrially
rated
suction
motor, the
60U contains
a suction
capacity of
400 CFM
(cubic
feet/minute)
[189m3/min.]
or 200 CFM
[94m3/min.]
through each
of two 3
[7.6cm]
suction
inlets
provided.
Dust and
grindings
are cleaned
from the air
intakes by
14 shakable
cloth filter
bags which
effectively
entrap 0.5
micron
particles
and larger.
Manufactured
to fit under
existing
work benches
or new
installations,
its compact
size
delivers
central
system
suction
power.
Finished in
a durable,
baked
coating. Suction
- 400 CFM
(cubic
feet/minute)
[189m3/min.]
through two
inlets
provided. Filter
Area - 14
shakeable
filter bags,
16 sq. ft.
filter
area. Cleaning
- External
foot shaker,
internal
dust tray.
Shipping Wgt.:
73 lbs [33.1
Kg]
Unit
Dimensions:
16 wide x
14 deep x
22 high
[41cm x 36cm
x 56cm]
Available
with
polyester
bags for use
with
aluminum
oxide, at
additional
cost. Note:
with
2-Fishmout
2-4 Pc Hose
|
|
|
Item # |
Description |
Price |
|
60U |
Dust Collector |
$647.19 |
|
60U-D |
Dust Collector w/ 1/2 HP
With hose and Fish Mount |
$736.63 |
|
60U-1 |
Dust Collector w/Poly Filter
Bags for A/02 |
$793.24 |
|
60UFB |
Set of 14 replacement
Filter Bags |
$266.69 |
|
60UFBP |
Set of 13 replacement
Filter Bags, Polyester for
A/02 |
$362.28 |
A
necessary accessory for the 60U Dust
Collector, The 60 U/S silencer
mounts on top of the 60U and lowers
the airflow noise level
approximately 20%-25%. Constructed
of sheet steel and lined with
acoustical foam to reduce noise
level of 60U. A must for quiet
offices and labs.
Shipping Wgt.: 5 lbs [2.3 Kg] Unit
Dimensions: 15 1/4 wide x 11 1/2
deep x 3 high [38.7cm x 29.2cm x
7.6cm]
|
Item # |
Description |
Price |
|
60U/S |
Silencer |
$78.97 |
|
|
|
77 Dust Collector |
|
|
A 3/4 HP
suction unit designed to provide suction
for up to three 3 [7.6cm] work
positions, simultaneously. Powered by a
ball bearing, capacitor start
industrially rated motor, the 77
contains 62 square feet [5.8m2] of cloth
filter area. 24 cloth filters are
cleaned with the aid of an external foot
shaker. The 77 dust collector generates
600 CFM (cubic feet/minute) [283m3/min.]
through the inlets provided. Standard
voltage is 115 Volts/60Hz. Unit also
available in 230 Volts/60Hz - single
phase or 220/440 Volts/60Hz, 3 phase.
Please specify voltage when ordering.
The 77 is shipped complete with switch
and box type silencer. A stack silencer
is available at additional cost.
Finished in a durable, baked coating.
Suction - 600 CFM (cubic
feet/minute)[283m3/min.] through inlets
provided Filter Area - 62 sq. ft.
through 24 shakable filter bags.
Cleaning - External foot Shaker;
removable cabinet tray.
Shipping Wgt.: 240 lbs [108.9 Kg]
Unit Dimensions: 24 wide x 20 deep x
38 1/2 high [61cm x 51cm x 98cm]
Available with polyester bags for use
with aluminum oxide, at additional cost.
|
Item # |
Description |
Price |
|
77 |
Dust Collector |
$1,760.29 |
|
77FB |
Replacement set of 24 cloths
filter bags |
$425.00 |
|
|
|
101 Dust Collector |
|
|
A 1 HP
suction unit designed to provide suction
for up to four 3 [7.6cm] work
positions, simultaneously. The 101 is
powered by a 1 HP ball bearing capacitor
start, industrially rated motor. This
unit contains 68 square feet [6.3m2] of
cloth filter area. 24 shakable filter
bags effectively entrap 0.5 micron
particles and larger in the 800 CFM
(cubic feet/minute) [378m3/min.] air
flow.
The 101 is provided with four 3 [7.6cm]
inlets. Special sized inlets may be
specified. Standard voltage is 115
Volts/60Hz. Units also available in 230
Volts/60Hz single phase and 220/440
Volts three phase. Please specify
voltage when ordering. The 101 is
shipped complete with a switch and box
type silencer. Finished in a durable,
baked finish. A stack silencer is
available at an additional cost. Suction
- 800 CFM (cubic feet/minute)
[378m3/min.]. Filter Area - 68 square
feet [6.3m2] through 24 filter bags.
Cleaning - External foot shaker;
removable cabinet tray.
Shipping Wgt.: 270 lbs [122.5 Kg]
Unit Dimensions: 26 wide x 24 deep x
41 high [66cm x 61cm x 104cm]
Available with polyester bags for use
with aluminum oxide, at additional cost.
|
Item # |
Description |
Price |
|
101 |
Dust Collector |
$1,936.76 |
|
101AS |
Dust Collector w/Auto Shaker |
$3,789.71 |
|
101FB |
Replacement set of 24 Cloth
Filter Bags |
$450.00 |
|
101FC-Retro |
Drum Cartridge Retrofit
101DC |
$389.00 |
|
|
|
52CSU ETCHER
CATCHER |
|
 |
Handler's
new Etcher Catcher collects dusts
created by the use of aluminum oxide
blasting pencils. Offered in three
configurations, the Etcher Catcher is
constructed to be ergonomically
accommodating when used with hand held
blasting pencils, preventing dusts from
collecting on table tops and surrounding
areas. The Etcher Catcher is available
in three configurations: 52 Etcher
Catcher with filter only - For light
office use. 52CFI Etcher Catcher with
filter and external 3" flange - For use
with your dust collector. 52CSU Etcher
Catcher with filter and self-contained
dust collector
Shipping Wgt.: 16 lbs [7.3 Kg]
Unit Dimensions: 11 wide x 16 deep x
9 high [27.9cm x 40.6cm x 22.8cm]
|
Item # |
Description |
Price |
|
52 |
Etcher Catcher W/O Suction |
$237.35 |
|
52CFI |
Etcher Cather W/Flange Inlet |
$263.82 |
|
52CSU |
Etcher Catcher Complete
w/Suction |
$311.49 |
|
|
|
Accessories |
|
Accessories |
|
|
Item # |
Description |
Price |
|
 |
66C-1 |
Grind-N-Tray Single Shield
|
$79.50 |
|
 |
66C-2 |
Grind-N-Tray Double Shield
|
$89.50 |
|
 |
66C-3 |
Magnetized Flange |
$39.50 |
|
 |
66C-5 |
Aluminum flange - Specify 3"
or 4" |
$28.95 |
|
 |
210T |
In-Drawer Suction Attachment |
$289.00 |
|
 |
66C-4 |
Flexi-Hose - Specify 3" or
4" |
$6.95 |
|
 |
66C-6 |
Clamps - Specify 3" or 4" |
$5.50 |
|
 |
66C-7 |
"T" Branch Connector
3"x3"x3" |
$59.95 |
|
 |
66C-10 |
Cut-Out Flange - Specify 3"
or 4" |
$57.13 |
|
 |
66C-12 |
Elbow - 3" |
$49.95 |
|
 |
66C-133 |
Branch Connector - 3" |
$59.50 |
|
|
|
|
