|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
*Note: There is a
Minimum Order of $50.00 for all Handler
Products. Any orders less than $50.00 will be
charged a processing fee. |
|
|
| |
| |
|
Handler
|
|
Lathes & Motors |
|
While
providing a variety of horsepower
ratings and speeds for the technician,
Red Wing motors are known world wide for
quality, dependability and
affordability. Precision turned shafts
made of alloy steel and double shielded
ball bearings insure the smooth movement
of both tapered and straight shafts.
When introduced in 1920, Red Wing motors
provided the precision and torque
required by the dental and industrial
trades. We are certain you will find
Handler Red Wing motors the quiet,
strong producer for your lab or
manufacturing facility. |
| |
|
26A
Red Wing Lathe |
|
 |
A full 1/4
HP, 1725/3450 rpm lathe for use on top
of laboratory bench (115 Volts/60Hz).
Its 4 1/2 [11.4cm] shaft height allows
for easy use by the technician with
hands resting on the tabletop. Shipped
with standard dental, tapered shafts,
each lathe includes a right and left
chuck remover, which provides ease of
removal of standard dental chucks. The
26A is manufactured to provide years of
durable service while being utilized for
such operations as polishing and
grinding. This unit may be supplied with
1/2 [1.3cm] straight shafts when
specified. Available in 115 Volts/50Hz,
220/50Hz and 220/60Hz at additional
charge. NOTE: Specify No. 26AS for motor
with 1/2 [1.3cm] straight shafts.
Shipping Wgt.: 39 lbs [17.7 Kg]
Unit Dimensions: 15 1/2 long x 7 7/8
wide x 7 1/4 high [39cm x 20cm x 18cm]
|
Part # |
Description |
Price |
|
26A |
Red Wing Lathe |
$254.47 |
|
|
|
26 Red Wing Lathe |
|
|
A full 1/4
HP, 1725/3450 rpm two speed polishing
lathe with 6 [15.2cm] shaft height (115
Volts/60Hz). Designed and built for use
as a polishing lathe, its tapered shafts
will accept standard dental tapered
chucks. The 6 [15.2cm] shaft height of
the 26 will allow the technician to
utilize larger diameter
buffing wheels for pumice and dry
polishing operations. This unit may be
supplied with 1/2 [1.3cm] straight
shafts when specified. Available in 115
Volts/ 50Hz 26A, 220 Volts/50Hz 26E and
220 Volts/60Hz 26C at additional charge.
NOTE: Specify No. 26S for motor with
1/2 [1.3cm] straight shafts.
Shipping Wgt.: 41 lbs [18.6 Kg]
Unit Dimensions.: 15 1/2 long x 8 wide
x 9 high [39cm x 20cm x 23cm]
|
Part # |
Description |
Price |
|
26 |
Red Wing Lathe |
$270.94 |
|
|
|
27 Red Wing Lathe |
|
|
A full 1/4
HP single speed 3450 rpm polishing motor
with a 6 [15.2cm] shaft height
(115Volts/60Hz). Designed to be utilized
by the technician who desires a single
speed polishing motor where a 3450 rpm
speed is used exclusively for polishing.
This unit may be supplied with 1/2
[1.3cm] shafts when specified. Available
in 115 Volts/50Hz, 220 Volts/50Hz and
220 Volts/60Hz at additional charge.
NOTE: Specify No. 27S for motor with
1/2 [1.3cm] straight shafts.
Shipping Wgt.: 41 lbs [18.6 Kg]
Unit Dimensions.: 15 1/2 long x 7 7/8
wide x 7 1/4 high [39cm x 20cm x 18cm]
|
Part # |
Description |
Price |
|
27 |
Red Wing Lathe |
$250.63 |
|
|
|
28L Red Wing Lathe |
|
|
A 1/3 HP
two speed 1725/3450 rpm polishing motor
with 4 1/2 shaft height. Built for the
technician who requires additional
torque, the 28L contains standard dental
tapered shafts with chuck removers. This
durable motor will provide years of
service for your laboratory. Available
in 115 Volts/60Hz as a standard product,
the 28L is also built in 115 Volts/50Hz
28D, 220 Volts/50Hz 28E and 230
Volts/60Hz 228L-E at additional charge.
NOTE: Specify No. 28LS for motor with
1/2 [1.3cm] straight shafts.
Shipping Wgt.: 40 lbs [18.1 Kg]
Unit Dimensions.: 15 3/4 wide x 7 7/8
deep x 7 1/2 high [40cm x 20cm x 18cm]
|
Part # |
Description |
Price |
|
28L |
Red Wing Lathe |
$284.16 |
|
|
|
28H Red Wing Lathe |
|
|
A 1/3 HP
two speed 1725/3450 rpm high base
polishing motor with 6 shaft height .
Built to accommodate larger diameter
buffs and chuck accessories, the 28H
provides added torque for the frequent
polisher. The unit is shipped with
standard dental tapered shafts with
chuck removers. Available in 115
Volts/60Hz and 115 Volts/50Hz, 220
Volts/50Hz and 220 Volts/60Hz at
additional charge.
NOTE: Specify No. 28HS for motor with
1/2 [1.3cm] straight shafts.
Shipping Wgt.: 42 lbs [19.5 Kg]
Unit Dimensions.: 15 3/4 wide x 7 7/8
deep x 8 3/4 high [40cm x 20cm x
22.2cm]
|
Part # |
Description |
Price |
|
28H |
Red Wing Lathe |
$284.16 |
|
|
|
29 Red Wing Motor |
|
|
A full 1/2
HP single speed 3450 rpm polishing motor
with 6 3/8 [16.2cm] shaft height (115
Volts/60Hz). Built for heavy use by the
technician and polisher, the rugged
polishing motor will provide years of
trouble free service. The 29 is
manufactured with 1/2 [1.3cm] straight
shafts, and is shipped complete with one
each left and right #20 tapered chucks.
Ideal for the laboratory or manufacturer
who performs constant polishing or
grinding operations. Available in 220
Volts/60Hz and 220 Volts/50Hz at
additional charge.
Shipping Wgt.: 45 lbs [20.4 Kg]
Unit Dimensions.: 18 1/2 long x 7 3/4
wide x 9 high [47cm x 20cm x 23cm]
|
Part # |
Description |
Price |
|
29 |
Red Wing Lathe |
$300.93 |
|
|
|
29A Red Wing Motor |
|
|
A full 3/4
HP single speed 3450 rpm polishing motor
with 6 3/8 [16.2cm] shaft height (115
Volts/60Hz). Built for extra heavy duty
use by the dental technician or
industrial polisher, who requires extra
torque. The 29A is manufactured with
1/2 [1.3cm] straight shafts, #20
tapered chucks for use with large buffs,
brushes and similar chucks. Available in
220 Volts/60Hz and 220 Volts/50Hz at
additional charge.
Shipping Wgt.: 47 lbs [21.3 Kg]
Unit Dimensions.: 18 1/2 long x 7 3/4
wide x 9 high [47cm x 20cm x 23cm]
|
Part # |
Description |
Price |
|
29A |
Red Wing Lathe |
$309.31 |
|
|
|
Chucks |
|
Handler
precision chucks are available in many
configurations. Manufactured of alloy steel,
brass and hardened steel, Handler chucks are
made in various designs to provide manual,
semi-automatic and automatic changing of
burs, mandrels, abrasives, buffs and
brushes. High Speed Spindles for grinding
and finishing of hard alloys are available
with automatic mandrel changing capability.
We will gladly discuss your particular chuck
requirements. Chucks made by Handler are
known world wide for function and
reliability. Special chucks made to your
specifications may be quoted. |
| |
|
1-6
Stone Chucks |
|
|
Stone Chucks
are designed to accommodate abrasive wheels
with various inside diameters as indicated
below. Handler stone chucks are manufactured
to exacting standards from quality brass.
For use only on tapered lathe shafts.
Specify chuck number (below) when ordering.
Shipping Wgt.: 6 oz [107 g]
Unit Dimensions:
3/4 diam x 2 long [2cm x 9cm] |
|
Part # |
Description |
Price |
|
1 |
Stone Chuck for 3/8 [1cm]
I.D. (hole size) Wheel -
RIGHT |
$8.95 |
|
2 |
Stone Chuck for 3/8 [1cm]
I.D. (hole size) Wheel -
LEFT |
$8.95 |
|
3 |
Stone Chuck for 5/16
[0.8cm] I.D. (hole size)
Wheel -RIGHT |
$8.95 |
|
4 |
Stone Chuck for 5/16
[0.8cm] I.D. (hole size)
Wheel - LEFT |
$8.95 |
|
5 |
Stone Chuck for 1/4 [0.6cm]
I.D. (hole size) Wheel -
RIGHT |
$8.95 |
|
6 |
Stone Chuck for 1/4 [0.6cm]
I.D. (hole size) Wheel -
LEFT |
$8.95 |
|
|
|
7
Tapered Steel Chuck |
|
|
The No. 7
tapered chuck is designed specifically for
use with buffing wheels, brushes and lead
centered wheels. Precision manufactured of
alloy steel, this chuck is built for
placement onto lathes and polishing motors
containing standard dental tapered shafts.
Specify 7L (Left) or 7R (Right) when
ordering.
Shipping Wgt.: 6 oz [107 g]
Unit Dimensions:
5/8 diam x 3 5/8 long [2cm x 9cm]
|
Part # |
Description |
Price |
|
7 |
Tapered Steel Chuck |
$8.95 |
|
|
|
7B
Tapered Brass Chuck |
|
 |
The No. 7B
tapered chuck is designed exactly as the No.
7 steel chuck, except it is made with brass.
These chucks provide easier on/off placement
onto tapered dental shafts, causing less
shaft wear.
Specify 7BL (Left) or 7BR (Right) when
ordering.
Shipping Wgt.: 6 oz [107 g]
Unit Dimensions:
5/8 diam x 3 5/8 long [2cm x 9 cm
|
Part # |
Description |
Price |
|
7B |
Tapered Brass Chuck |
$8.95 |
|
|
|
8
Jacobs Type Jr. Chuck |
|
|
The No. 8
chuck is designed for use on polishing
motors which have a 1/2 [1.3cm] straight
shaft. All specifications are identical to
the 8T, except for its adaptation onto a
1/2 [1.3cm] shaft.
NOT available for the left shaft of a motor.
Shipping Wgt.: 10 oz [238 g]
Unit Dimensions: 4 1/4 long x 1 diam [11cm
x 3cm]
|
Part # |
Description |
Price |
|
8 |
Jacobs Type Jr. Chuck |
$26.95 |
|
|
|
8T
Jacobs Type Jr. Chuck |
|
|
The 8T chuck
is designed specifically for use with small
burs and mandrels which do not exceed 1/4
[0.6cm] in diameter. The 8T is built to be a
less expensive and semi-precise adjustable
chuck for use on lathes with tapered shafts.
Available for the RIGHT side of a lathe
only, this chuck opens with a CCW twist and
closes with a CW twist.
NOTE: For 1/2 shaft order #8
Shipping Wgt.: 8 oz [227 g]
Unit Dimensions: 2 1/4 long x 1 diam [6cm
x 3cm]
AVAILABLE FOR 1/2 SHAFT.
|
Part # |
Description |
Price |
|
8T |
Jacobs Type Jr. Chuck |
$26.95 |
|
|
|
9 Arbor Band |
|
 |
Designed to
accommodate 3/4 diameter x 3/4 wide [1.9cm
x 1.9cm] abrasive bands. Manufactured of
alloy steel and plated to fit onto standard
dental tapered shafts, the abrasive band is
held in place by tightening the end screw
against the rubber arbor.
Specify 9L (Left) or 9R (Right) when
ordering.
Shipping Wgt.: 8 oz [227 g]
Unit Dimensions: 4 7/8 long x 13/16 diam
[12cm x 1cm] with a 1/4 diam shank
|
Part # |
Description |
Price |
|
9 |
Arbor band |
$17.95 |
|
|
|
12
Stone Chuck |
|
 |
Designed with
a 1/4 [0.6cm] shank for use in Jacobs type
chucks. This stone chuck accommodates
abrasive stones with 1/4 [0.6cm] I.D. arbor
only. Manufactured of alloy steel and
plated.
Specify 12L (Left) or 12R (Right) when
ordering.
Shipping Wgt.: 4 oz [113 g]
Unit Dimensions: 2 3/16 long x 3/4 diam
[6cm x 2cm]
with a 1/4 diam shank.
|
Part # |
Description |
Price |
|
12 |
Stone Chuck |
$6.50 |
|
|
|
13-1 Tapered Chuck |
|
 |
Designed with
1/4 [0.6cm] shank for use in Jacobs type
chucks. This tapered chuck is built to
accept small buffs, brushes and
lead-centered wheels. Made of alloy steel
and plated.
Specify 13-1L (left) or 13-1R (right) when
ordering. Shipping Wgt.: 4 oz [113 g]
Unit Dimensions: 2 5/8 long x 1/2 diam
[7cm x 1.3cm]
with a 1/4 diam shank.
|
Part # |
Description |
Price |
|
13-1 |
Tapered Chuck |
$9.95 |
|
|
|
13
Arbor Band Chuck |
|
 |
Designed with
1/4 [0.6cm] shank for use in Jacobs type
chucks. Accepts 3/4 x 3/4 [1.9cm x 1.9cm]
abrasive arbor bands. Manufactured of alloy
steel and plated.
Specify 13L (Left) or 13R (Right) when
ordering.
Shipping Wgt.: 4 oz [113 g]
Unit Dimensions: 2 5/8 long x 3/4 diam
[7cm x 2cm]
with a 1/4 diam shank.
|
Part # |
Description |
Price |
|
13 |
Arbor Band Chuck |
$6.50 |
|
|
|
67A
Auto-Chuck Kit |
 |
An automatic
chuck kit designed specifically for the
changing of the chuck attachments listed
below while lathe is in motion. The
Auto-Chuck provides the user with fast chuck
changing at a lower cost than many precision
chucks. This chuck is designed for gross
reduction and rough trimming. Easily
installs onto a dental tapered shaft. The
67A kit includes a wrench for tightening the
bur adapter. Specify for Right or Left side.
Kit includes:
67-0 Auto-chuck Qty - 1
67-4 Wrench Qty - 1
67-5 Stone Chuck Qty - 1
67-7 Tapered Chuck Qty - 1
67-8 3/32 [0.2cm] Bur Chuck Qty - 1
67-9 Arbor Chuck Qty - 1
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions:
5 long x 3 3/4 deep x 1 high [12.7cm x
9.5cm x 2.6cm]
|
Part # |
Description |
Price |
|
67A |
Auto-Chuck Kit |
$75.44 |
|
|
|
18
Atlas Precision Chuck |
|
 |
The No. 18
Atlas chuck is a precise Jacobs type chuck
for use with chuck accessories having a
diameter of .001 [0.03mm] to .250 [6.4mm].
The 18 Atlas chuck attaches to the right
shaft of a dental lathe with standard dental
tapered shafts. Machined to precision
limits, the 18 Atlas provides the technician
with concentricity unmatched by any other
adjustable chuck.
For Right shaft only.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 2 1/2 long x 1 1/4 diam
[6cm x 3cm
|
Part # |
Description |
Price |
|
18 |
Atlas Precision Chuck
(German Made) |
$82.99 |
|
|
|
67-0 Auto-Chuck |
|
 |
Auto-Chuck
only for use with above mentioned
attachments. Automatically changes above
chucks while lathe is in motion.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 2 1/2 long x 1 diam [6cm
x 3cm]
|
Part # |
Description |
Price |
|
67-0 |
Auto-Chuck |
$55.15 |
|
|
|
20 Tapered Chuck |
|
 |
A tapered
chuck manufactured of steel alloy for use on
1/2 [1.3cm] straight or 5/8 [0.6cm]
straight shafts. Available for the Left or
Right side of a polishing motor, this chuck
provides the user with a heavy duty chuck
for use with buffs, brushes and lead
centered accessories. Mounts with set
screws.
When Ordering, please specify
20L 1/2 [1.3cm] 20R 1/2 [1.3cm]
20L 5/8 [1.6cm] 20R 5/8 [1.6cm]
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3/4 diam x 4 1/4 long
[2cm x 11cm]
|
Part # |
Description |
Price |
|
20 |
Tapered Chuck |
$9.95 |
|
|
|
67B Auto-Chuck II |
|
 |
The Auto-Chuck
II was designed to interchange 3/32 [0.2cm]
burs and mandrels while lathe is in motion.
By simply placing finger pressure on the
outer, frontal shell of this chuck, burs and
mandrels may be changed without slowing or
stopping the dental lathe. Constructed of
alloy steel with hardened steel cylindrical
bearings, the Auto-Chuck II will provide
precise bur changing while saving valuable
time. Installs on the tapered shaft of
dental lathes. For Right side only.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3 1/2 long x 1 diam
[8.9cm x 2.6cm]
|
Part # |
Description |
Price |
|
67B |
Auto-Chuck II |
$62.95 |
|
|
|
Chuck Changers |
|
Handler
precision chucks are available in many
configurations. Manufactured of alloy steel,
brass and hardened steel, Handler chucks are
made in various designs to provide manual,
semi-automatic and automatic changing of
burs, mandrels, abrasives, buffs and
brushes. High Speed Spindles for grinding
and finishing of hard alloys are available
with automatic mandrel changing capability.
We will gladly discuss your particular chuck
requirements. Chucks made by Handler are
known world wide for function and
reliability. Special chucks made to your
specifications may be quoted. |
| |
|
16 Chuk/Changer |
|
 |
The Handler
Chuk/Changer was designed to provide full
automatic, precision changing of 1/4
[0.6cm] and 3/32 [0.2cm] diameter burs,
mandrels and chuck accessories with the
slight movement of a handle while the motor
is turning. The Chuk/Changer provides the
technician with exacting concentricity and
quick, easy changing of various chucks which
greatly speeds grinding, polishing and
finishing procedures. The No.16 Chuk/Changer
is adaptable to most types of dental motors,
including older models e.g. R & M, Ritter,
Baldor, Emesco and Red Wing. |
The No.16 is shipped complete
with chuck accessories as
follows:
-
P-16-15 Arbor Band Chuck Qty
- 1
-
P-16-16 Spiral Tapered Chuck
Qty - 1
-
P-16-19 Stone Chucks Qty - 2
-
P-16-20 Mandrels for small
abrasive wheels Qty - 2
-
P-16-8 Collet Wrench Qty - 1
-
P-16-10 Clutch Qty - 1
-
P16-ADW Adapter Qty - 1
NOTE: Specify make, model
and catalogue number of lathe
when ordering. 16L Chuk/Changer
is for use on left side of
motor.
Shipping Wgt.: 5 lbs [2.3 Kg]
Unit Dimensions: 8 3/4 long x
4 wide x 6 1/4 high [22cm x
10cm x 16cm] |
|
|
Part # |
Description |
Price |
|
16 |
16 Chuck/Changer
W/Accessories |
$276.78 |
|
16-0 |
16 Chuck/Changer W/O
Accessories |
$259.43 |
|
|
|
16B
Chuk/Changer with Lathe |
|
 |
The 16 Chuk/Changer
is factory installed to the right side of a
26A Low Base, Red Wing Lathe. This
combination provides the technician with the
ultimate in chuck changing efficiency at
both low and high lathe speeds. The movement
of the activating handle allows the
technician to change from 1/4 [0.6cm] to
3/32 [0.2cm] burs, mandrels and chuck
accessories without stopping the lathe. This
combination will pay for itself in time
saved, while providing excellent
concentricity for accurate, professional
results in finishing appliances. All chuck
and maintenance accessories included. 16B
combination shipped on LOW BASE 26A lathe 4
1/2 shaft height unless otherwise
specified.
Shipping Wgt.: 45 lbs [20.4 Kg]
Unit Dimensions:
18 3/4 long x 8 wide x 8 1/8 high [48cm x
20cm x 21cm]
16B-1 No. 16 Chuk Changer mounted on 26 high
base lathe (16 shaft hgt). |
|
Part # |
Description |
Price |
|
16B |
16B Chuck/Changer on 26A
Lathe - Low Base |
$563.10 |
|
16BBL |
Lathe with chuck changer on
both sides |
$728.19 |
|
|
|
16SB
Chuck Changer |
A combination
of a 28L 1/3 HP two speed polishing motor
and a Handler Chuk/Changer. The addition of
a higher torque motor with a Chuk/Changer
will provide the technician with years of
chuck changing efficiency. The 16SB will
save time while assuring accuracy for the
technician who frequently interchanges 3/32
and 1/2 diameter burs, mandrels and chuck
accessories. Shipped complete in 115
Volts/60Hz.
Available in 115 Volts/50Hz, 220 Volts/50Hz
and 230 Volts/60Hz at additional charge.
Shipping Wgt.: 46 lbs [20.9 Kg]
Unit Dimensions.: 19 wide x 8 deep x 8
1/8 high
[48.3cm x 20.3cm x 23cm] |
|
Part # |
Description |
Price |
|
16SB |
Chuk/Changer on 28L |
$606.49 |
|
|
|
16SB-1 Chuk Changer |
A Chuk/Changer
in combination with a high base 1/3 HP two
speed polishing motor No. 28. The 16SB-1
will allow the technician to utilize larger
diameter buffs and abrasives, while
obtaining the accuracy and speed of
interchanging both 3/32 [2.3 mm] and 1/2
[6.6 mm] burs, mandrels and chuck
accessories while the lathe is in motion.
Shipped complete in 115 Volts/60Hz.
Available in 115 Volts/50Hz, 220 Volts/50Hz
and 230 Volts/60Hz at additional charge.
Shipping Wgt.: 47 lbs [21.3 Kg]
Unit Dimensions.: 19 wide x 8 deep x 8
1/8 high [48.3cm x 20.3cm x 23cm]
|
Part # |
Description |
Price |
|
16SB-1 |
Chuk/Changer on 28H |
$606.49 |
|
|
|
|
|
16B-1 No. 16 Chuk/Changer |
Factory
installed onto a No. 26 high base, Red Wing
Lathe.
Shipping Wgt.: 46 lbs [20.9 Kg]
Unit Dimensions: 18 3/4 long x 8wide x 9
1/8 high
[48cm x 20cm x 23cm]
|
Part # |
Description |
Price |
|
16B-1 |
Chuk/Changer on 26 Lathe |
$563.10 |
|
|
|
|
|
|
|
You are visitor no.
P-Updated:
10/14/2008
|
