Star X-Ray

Item #	Description	Price
SP1	Splash pan only. No cut-out for light	$51.00
SP 2R	With light on right side	$57.00
SP 2L	With light on left side	$57.00
SP 3	Equipped with shield only. No cut-out for light	$65.00
SP 4R	With shield and light on right	$72.00
SP 4L	With shield and light on left	$72.00
SP 5	Shield only. Can be purchased separately and attached to splash pan	$55.00
SP 6	Inner pan	$20.00

Handler

Splash hoods in various designs and sizes to fit your requirements are available with and without lights, suction inlets and internal dust/pumice pans.

Splash Hoods

Resin Splash Hoods
[ No Rusting ] [ No Pitting ] [ Easy to Clean ] [ Long Lasting ] [ Durable ]

86RHN Resin Splash Hoods

Resin Splash Hood (No light)
NOTE: To order 86RHN w/ shield, order 86RHN-S.
Shipping Wgt.: 5 lbs [2.3 kg]
Unit Dimensions: 6” wide x 10” deep x 12” high [15cm x 25cm x 30 cm]

Part #	Description	Price
86RHN	Resin Splash Hood (w/o light)	$69.50
86RHN-S	Same as 86RHN plus #86B STA-KLEEN SHIELD	$73.94
86B	STA-KLEEN SHIELD	$23.50

86RHL Resin Splash Hood

Resin Splash Hood (With light) w/Shield. Specify Right Light (86RHL-R) or Left Light (86RHL-L)
Shipping Wgt.:5 lbs [2.3 kg]
Unit Dimensions: 6” wide x 10” deep x 12” high
[15cm x 25cm x 30 cm]

Part #	Description	Price
86RHL	Resin Splash Hood with Light & Shield	$75.50

Aluminum Splash Hoods
Handler EVERBRITE aluminum splash hoods are available in three standard sizes with or without lights to provide the user with protective, dust collecting capabilities. Individually boxed for shipping protection, each aluminum hood is hand fitted and polished to give years of service.
*When ordering hoods with lights, please specify if light is to be right of left side of hood*

86D Splash Hood

The 86D Splash Hood is a standard 83WL splash hood supplied with an 86B Protective Clear acrylic Shield. This hood may be fitted with either flange or cut-out with flange, for connection to a dust collector. Specify light on right (R) or left (L).
Shipping Wgt.: 4 lbs [1.5 Kg]
Unit Dimensions:
12” high x 6” wide x 10” deep [30cm x 15cm x 25cm]

Part #	Description	Price
86D	Splash Hood w/Light & Shield	$79.50

85NL Splash Hood

12” high x 10” wide x 14” deep [30cm x 25cm x 36cm] with insert pan (No light).
Shipping Wgt.: 5 lbs [2.3 Kg]
Unit Dimensions: 12” high x 10” wide x 14” deep
[30cm x 25cm x 36cm]

Part #	Description	Price
85NL	Splash Hood	$79.50

84NL Splash Hood

12” high x 8” wide x 12” deep [30cm x 20cm x 30cm] with insert pan (No light).
Shipping Wgt.: 5 lbs [2.3 Kg]
Unit Dimensions: 12” high x 8” wide x 12” deep
[30cm x 20cm x 30cm]

Part #	Description	Price
84NL	Splash Hood	$64.50

83NL Splash Hood

12” high x 6” wide x 10” deep [30cm x 15cm x 25cm] with insert pan (No light).
Shipping Wgt.: 3 lbs [1.4 Kg]
Unit Dimensions:
12” high x 6” wide x 10” deep [30cm x 15cm x 25cm]

Part #	Description	Price
83NL	Splash Hood	$54.50

WL Splash Hood

83WL Splash Hood
12” high x 6” wide x 10” deep [30cm x 15cm x 25cm] with insert pan. Supplied WITH light.
Specify Right (R) or Left (L).
Shipping Wgt.: 3 lbs [1.4 Kg]
Unit Dimensions:
12” high x 6” wide x 10” deep [30cm x 15cm x 25cm]

84WL Splash Hood
12” high x 8” wide x 12” deep [30cm x 20cm x 30cm] with insert pan. Supplied WITH light.
Specify Right (R) or Left (L).
Shipping Wgt.: 5 lbs [2.3 Kg]
Unit Dimensions:
12” high x 8” wide x 12” deep [30cm x 20cm x 30cm]

85WL Splash Hood
12” high x 10” wide x 14” deep [30cm x 25cm x 36cm] with insert pan. Supplied WITH light.
Specify Right (R) or Left (L).
Shipping Wgt.: 5 lbs [2.3 Kg]
Unit Dimensions:
12” high x 10” wide x 14” deep [30cm x 25cm x 36cm]

Part #	Description	Price
83WL	Splash Hood with Light	$59.50
84WL	Splash Hood with Light	$69.50
85WL	Splash Hood with Light	$78.97

Safety Shields

Protective shields are manufactured in various configurations to help protect the technician and comply with OSHA standards

26SHLD Safety Shield

Designed for adjustable protection, the 26SHLD may be mounted on a lathe, table top or Model Trimmer. Adapting it to a base bolt hole, or drilling a hole to accommodate the machine bolt mounted base, will allow mounting to a sturdy surface.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 8” wide x 13” high (adjustable) [20.3cm x 33cm]

Part #	Description	Price
26SHLD	Flex Safety Shield	$50.03

32SHLD Safety Shield

Handler designed the 32SHLD to provide adjustable protection against flying debris. This is a must for OSHA compliance.
It’s clear acrylic 6” X 8” shield is attached to a 13” adjustable arm. A strong magnetic base is supplied with each unit to allow the unit to adhere to magnetic surfaces.
The magnetic base may be removed for the adjustable arm to be attached to a non-magnetic surface using a wood screw or a machine bolt. The shield should be located at Model Trimmers, Polishing Motors and any other work station where dust and debris are present.
No. P32SHLD-01 Replacement Shields
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions:
8” wide x 13” high (adjustable) [20.3cm x 33cm]

Part #	Description	Price
32SHLD	Safety Shield	$58.50
P32SHLD-01	Replacement Shields

79 The Protector

Handler designed this shield of clear acrylic to help protect against flying debris. The Protector is manufactured of heavy 3/8” clear acrylic and fitted with non-skid soft vinyl feet. It is bent at a convenient angle to allow the user to view work in progress while helping to protect against grinding and polishing dusts.
The front section of the shield is shaped to allow the technician to work close to the chuck area. Built to help meet OSHA standards, the Protector provides clear viewing protection from flying debris created by rotary grinding or polishing operations.
It is a necessary companion for Handler Splash Hoods and Fishmouths.
Shipping Wgt.: 2 lbs [1 Kg]
Unit Dimensions: 8” high x 9 3/4” deep x 7” wide
[20cm x 25cm x 18cm]

Part #	Description	Price
79	The Protector	$59.50

86B STA-KLEEN Shield

A clear acrylic shield for placement onto your existing or new splash hood. Manufactured of clear acrylic, the 6” wide x 9” long [15cm x 23cm] shield is adjustable to any vertical position within 180 degrees for maximum protection from flying debris and wet pumice.
Wipes clean with a damp cloth and adaptable to most splash hoods, this protective shield is a MUST for proper protection of laboratory personnel, while stopping splattering pumice stains.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions:
6” wide x 9” long [15cm x 23cm]

Part #	Description	Price
86B	STA-KLEEN Shield	$23.50

Fishmouths

87 Fishmouth

For use on the bench top to assist in the collection of grinding and polishing debris while connected to a dust collector. The fishmouth is a widemouthed type hood which directs debris created by lathe or handpiece operations into a dust collector.
Manufactured of Quality Resin which is impervious to germicides, the 87 is fitted with its own 3” [7.6cm] diameter suction cut-off. The fishmouth is contoured for use with a Lathe or a handpiece.
Shipping Wgt.: 3 lbs [1.4 Kg]
Unit Dimensions: 6 3/4” high x 11 1/2” deep x 6 1/2” wide [30cm x 19cm x 17cm]

Part #	Description	Price
87	Fishmouth	$75.56

You are visitor no.

P-Updated: 08/07/2008