SMALL DENTAL EQUIPMENT--->

High and Low Speed Handpieces

StarDental Handpieces--->

Titan Low-Speed Motor Systems

Titan Low-Speed Motor Systems

            The lightweight titanium low-speed system by StarDental, the Titan-T, features a
            smooth powerful air driven motor with superior concentric cutting performance and
            incredible versatility. The solid titanium motor and attachment housings allow for a 25%
            weight reduction from the Titan 3 stainless steel version. This decreases hand and wrist
            fatigue. The high corrosion resistance inherent to titanium allows for years of heat
            sterilization without the damaging effects associated with other metals.

Titan 3           |         Titan T

Features and Benefits"

• Titanium Construction
  25% weight reduction provides greater tactile response and reduced hand and wrist fatigue. Superior strength and corrosion-resistance of titanium proven better withstand the damaging effects of heat sterilization.

• System Flexibility
  100-5,000 or 100-20,000 rpm (depending on motor) speed range capability, requiring only a minimum of attachments to meet a variety of procedural needs.

• LubeFree
  Motor, Straight Nose Cone, Motor-to-Angle Adaptor, Torque Multiplier and Angles are LubeFree, which reduces maintenance time and the high cost of repeated lubrication.

• 360° Quick Connect Swivel
  Reduces tubing drag for optimum operator comfort. Redesigned for easier disconnection of the handpiece for sterilization.

• Better Performance Under Load (Torque)
  Less likely to stall under higher torque requirements than other low speed handpiece systems.

• Chairside Repairable Angles
  minimized operator downtime and reduces cost relative to other low speed handpiece systems.

Specifications:
Construction:                     Titanium (Titan-T) - Stainless Steel (Titan 3)
Speed Range:                     100-5000 rpm, 5000 rpm Speed Motor
                                       100-20,000 rpm, 20,000 rpm Speed Motor
Recommended Air Pressure:   40 psi at swivel interface
Air Flow:                            2.1 SCFM @ 40 psi at maximum power output
                                        at swivel interface
Sterilization:                       Steam Sterilization up to 275°F (135°C)
Rotation:                           Forward and Reverse
Lubrication:                        Not required for LubeFree motor and attachments;
                                       daily for lubricated angles

 

Dental Application Guide for the Titan Handpiece Systems
Procedure	System Configuration Options	Operating RPM Range
Prophy	5,000 RPM Motor       +   Motor-to-Angle Adaptor       + Five Star Prophy Angle 20,000 RPM Motor     +   Torque Multiplier    +Motor-to-Adaptor  + Fiver Star Prophy Angle	1,000-3,000 1,000-3,000
Grinding and Trimming (Denture work, crown, and bridge work, adjustment, disking, fabrication and trimming of temporaries)	20,000 RPM Motor    +  Straight Nose Cone	10,000-20,000
Post and Pin Drilling	5,000 RPM Motor  + Motor-To-Angle Adaptor  +  Ball Bearing Auto Latch Angle OR + Ball Bearing Auto Latch Angel 20,000 RPM Motor + Torque Multiplier  + Motor-to-Angle Adaptor + Ball Bearing Latch Angle OR + Ball Bearing Auto Latch Angle	1,000-5,000 1,000-5,000
Pin Setting	5,000 RPM Motor + Motor-to-Angle Adaptor  + Ball Bearing Auto Latch Angle OR + Ball Bearing Auto 20,000 RPM Motor  + Motor-to-Angle Adaptor  + 10:1 Gear Reduction Latch Angle   + 10:1 Gear Reduction Latch Angle 20,000 RPM Motor  + Torque Multiplier  +  Motor-To-Angle Adaptor   +  10:1 Gear Reduction Latch Angle	1,000-5,000 500-2,000 500
Finishing cavity and crown preps	20,000 RPM Motor + Motor-to-Angle Adaptor  + Ball Bearing Friction Grip Angle OR + Ball Bearing Autochuck Friction Grip Angle OR + Ball Bearing Latch Angle OR + Ball Bearing Auto Latch Angle	10,000-20,000
Polishing Amalgam, composites, gold margins	20,000 RPM Motor + Motor-to-Angle Adaptor  + Ball Bearing Latch Angle OR + Ball Bearing Auto Latch Angle	10,000-20,000
Endodontic Canal enlargements (using Gates-Glidden drills) and sealing (using Lentulo), debridement (using files reamers) and reamers	20,000 RPM Motor + Motor-to-Angle Adaptor  +  10:1 Gear Reduction Latch                                                                     Angle 5,000 RPM Motor  + Motor-to-Angle Adaptor  +  Auto Latch Endodontic Angle                                                                    for Standard Files & Reamers                                                                     (90° Reciprocating Motion)                                                                     OR                                                                     Manual Latch Endodontic                                                                     Angle Latch Type Files &                                                                     Reamers (90° Reciprocating                                                                     Motion)	500-2,000   350-5,000
Endodontic Condensing gutta percha	20,000 RPM Motor + Motor-to-Angle Adaptor  + Ball Bearing Latch Angle OR + Ball Bearing Auto Latch Angle	10,000-20,000
Endodontic Root Canal Filling	5,000 RPM Motor  + 16:1 Contra Angle Attachment   + Ball Bearing Manual Latch Angle  OR + Ball Bearing Auto Latch Angle 20,000 RPM Motor  + Torque Multiplier  + 16:1 Contra Angle Attachment  + Ball Bearing Manual Latch Angle   OR  + Ball Bearing Auto Latch Angle	300 300
Caries Removal	20,000 RPM Motor  + Torque Multiplier  +  Motor-To-Angle Adaptor   + Ball Bearing Autochuck Friction Grip Angle OR  + Ball bearing Latch Angle  OR + Ball Bearing Friction Grip Angle  OR + Ball Bearing Auto Latch Angle 5.000 RPM Motor  +  Motor-to-Angle Adaptor + Ball Bearing Autochuck Friction Grip Angle OR  +  Ball bearing Latch Angle  OR +  Ball Bearing Friction Grip Angle  OR + Ball Bearing Auto Latch Angle	2,000-5,000   2,000-5,000

 

Titan-T Motors Titanium Constructed and Lube Free
Item #	Description	Price
263940	Titan-T 5K Motor	$586.00
263941	Titan-T 20K Motor	$510.00
Titan-T Attachments Titanium Constructed and Lube Free
Item #	Description	Price
263942	Straight Nose Cone Attachment	$325.00
263970	Motor-To-Angle Adaptor (replaces #263943)	$165.40
263944	Torque Multiplier	$159.00
260152	Swivel, Titan Motor, 2-Line*	$99.00
260144	Swivel, Titan Motor, 4-Line*	$99.00
263230	16:1 Contra Angle Attachment*	$295.00
Titan-T LubeFree Angles Titanium Constructed
Item #	Description	Price
263946	LubeFree Five Star Prophy Angle	$80.00
263950	LubeFree Ball Bearing Auto Latch Angle	$189.00
263948	LubeFree Ball Bearing Manual Latch Angle	$140.00
263954	LubeFree Ball Bearing Autochuck Friction Grip Angle	$189.00
263955	LubeFree Ball Bearing Manual Chuck Friction Grip Angle	$156.00
Titan-T Lubricated Angles Titanium Constructed
Item #	Description	Price
263949	Ball Bearing Auto Latch Angle	$175.00
263947	Ball Bearing Manual Latch	$127.00
263953	Ball Bearing Autochuck Friction Grip Angle	$175.00
263952	Ball Bearing Manual Chuck Friction Grip Angle	$129.00
263945	Five Star Prophy Angle	$79.00
263951	10:1 Reduction Angle	$139.00

* Denotes Stainless Steel non-titanium construction

 

Titan 3 Lube Free Motors
Item #	Description	Price
262261	Titan 3 5K Motor	$555.00
262262	Titan 3 20K Motor	$499.00
262409	Titan 3 5K Fixed Backend Motor	$650.25
262410	Titan 3 20K Fixed Backend Motor	$573.75
Titan 3 LubeFree Attachments
257506	Straight Nose Cone Attachment	$352.50
264073	Motor-To-Angle Adaptor (replaces #203297)	$161.25
258443	Torque Multiplier	$155.00
260152	Swivel, Titan Motor, 2-Line	$99.00
260144	Swivel, Titan Motor, 4-Line	$99.00
263230	16:1 Contra Angle Attachment	$289.00
Titan 3 LubeFree Angles
263240	LubeFree Five Star Prophy Angle	$79.00
264146	LubeFree Ball Bearing Auto Latch Angle	$208.50
262738	LubeFree Ball Bearing Manual Latch Angle	$129.00
264151	LubeFree Ball Bearing Autochuck Friction Grip Angle	$179.00
262740	LubeFree Ball Bearing Manual Chuck Friction Grip Angle	$129.00
Titan 3 Lubricated Angles
264182	Ball Bearing Auto Latch Angle	$169.00
259005	Ball Bearing Manual Latch	$119.00
264149	Ball Bearing Autochuck Friction Grip Angle	$169.00
258965	Ball Bearing Manual Chuck Friction Grip Angle	$121.00
263176	Five Star Prophy Angle	$69.00
264180	10:1 Reduction Angle	$129.00
262570	Endodontic Angle, Auto Latch for Standard Files	$210.00
262571	Endodontic Angle, Manual Latch for Latch Type Files and Reamers	$210.00
262539	DentalLube II, 1oz.	$9.75
203043	Cleaning Brush for Straight Nose Cone	$4.06
203108	Bur Tool for Ball Bearing Friction Grip Contra Angle	$16.25
203048	Disconnect Wrench for all StarDental Contra Angles	$5.69
258953	End Cap Wrench for Prophy, Friction Grip, and Latch Angle	$6.50
261339	Auto Latch End Cap Wrench	$26.00
260293	Autochuck Friction Grip End Cap Wrench	$26.00
257504	Tip for Straight Nose Cone #257506	$43.88

You are visitor no.